Colecția instituțională: Recent submissions

  • Types of textile waste in the clothing industry 
    CANGAS, Svetlana; FLOREA-BURDUJA, Elena (Київський національний університет технологій та дизайну, 2025)
    Textile waste obtained from the activity of garment enterprises, but also as a result of clothing consumption, contributes significantly to environmental pollution. The circular economy strategy promoted today, which ...
  • Application of ecodesign strategies in the creation of board games 
    ADASCALITA, Lucia; CAZAC, Viorica (Київський національний університет технологій та дизайну, 2025)
    The study explores the implementation of the ecodesign strategy in the design of board games and their packaging. It also addresses the development of specialized skills in Design and Printing Technologies students, aiming ...
  • Packaging for chocolate bars - the influence of color on consumer perception in the Republic of Moldova 
    ADASCALIȚA, Lucia; FILAT, Paul; CEBANIȚĂ, Alessia (Київський національний університет технологій та дизайну, 2025)
    The paper discusses the role of color in chocolate package design, analyzing how color influences consumer attitudes and purchase behavior. Through a focus on Moldova, the study reveals how color arouses feelings, shapes ...
  • Laser cutting, Zero Waste and virtual prototyping – sustainable innovations in fashion design 
    ŞESTIRICOVA, Marina; FLOREA-BURDUJA, Elena; IROVAN, Marcela; RARU, Aliona; BUJOREAN, Tatiana (Київський національний університет технологій та дизайну, 2025)
    Zero Waste is a sustainable concept that aims to eliminate waste by optimizing resources and reusing materials. In the fashion industry, it involves efficient tailoring techniques, recycling and the use of advanced ...
  • Adaptive and smart clothing for patients 
    SCRIPCENCO, Alexandr; SСRIPCENСO, Angela; SCRIPCENCO, Alexandr (Київський національний університет технологій та дизайну, 2025)
    Conceptual design of hospital clothing is based on a study of the operating conditions, the identification of requirements for products and materials, and then carried out the selection of materials, next is the system ...
  • Digital prototyping – a sustainable direction in contemporary fashion 
    FLOREA-BURDUJA, Elena; CANGAS, Svetlana; RARU, Aliona (Київський національний університет технологій та дизайну, 2025)
    3D prototyping software is an innovative solution that revolutionizes the design and production process, allowing the creation of virtual samples without wasting physical materials. Through digital garment simulation, ...
  • Retrospectives of the evolution of the fashion industry in the Republic of Moldova 
    CAZAC, Viorica; CÎRJA, Jana; URSU, Elena (Київський національний університет технологій та дизайну, 2025)
    The paper presents the results of the study on the evolution of fashion in the Republic of Moldova from 2010 to 2025. The stages of evolution were analyzed and presented, as well as the main support programs that contributed ...
  • Technological aspects of customizing garments and textile accessories through heat transfer printing 
    ADASCALIȚA, Lucia; MUSTEAȚA, Daria; DUGAN, Alina; NASTAS, Maria (Київський національний університет технологій та дизайну, 2025)
    The present study aims to conduct a comparative analysis of the two widely used thermal printing methods in the textile industry: DTF (Direct-to-Film) heat transfer and vinyl heat transfer. These techniques are essential ...
  • Protected green spaces in spatial planning as a key element of climate change adaptation 
    NOWAK, Maciej J.; MITREA, Andrei; DÜHR, Stefanie; GAGAKUMA, Desmond; LEGUTKO-KOBUS, Paulina; PEÑA, Sergio; PIERRI-DAUNT, Ana Beatriz; KHAVARIAN-GARMSIR, Amir Reza; BLASZKE, Małgorzata (Taylor and Francis, 2025)
    This chapter defines the key terms and theses that will be discussed subsequently. It provides a literature-based overview of the relationship between spatial planning and climate change adaptation. An in-depth analysis ...
  • ZnFe2O4/ZnO:Ga/glass heterostructure as peroxidase enzyme mimetics for hydrogen peroxide sensing 
    SIDORENKO, Anatolie; GUTSUL, Tatiana; MONAICO, Elena; LUPU, Maria; ZAVRAJNYI, Serghey; VASEASHTA, Ashok (Springer Nature, 2025)
    We report here a method for synthesizing ZnO:Ga and ZnFe2O4 films and ZnFe2O4/ZnO:Ga heterostructure and studying them as peroxidase enzyme mimetics for hydrogen peroxide determination and simulation-based detection has ...
  • A simple fabrication route of tellurium nanocomposites via solvothermal recrystallization in nitric acid 
    AFANASIEV, Andrei; MOCREAC, Olga; TSIULYANU, Dumitru (Trans Tech Publications Ltd, 2025)
    Nanocomposites of tellurium and sodium nitrate were synthesized via a simple thermal dissolution of polycrystalline tellurium powder in nitric acid, followed by tellurium reduction in the presence of sodium dithionite ...
  • The absorption and dispersion of visible and near IR light in glassy AsS3-GeS4 thin films 
    CIOBANU, Marina; TIULEANU, Ana-Maria; TSIULYANU, Dumitru (Trans Tech Publications Ltd, 2025)
    The work is devoted to preparation and optical study of thin solid films of pseudo-binary AsS3 - GeS4 glasses, which are remarkable as topologically belonging to isostatic materials from intermediate phase (IP) region. The ...
  • Urban planning and the protection of green spaces for climate change adaptation in Warsaw, Poland 
    LEGUTKO-KOBUS, Paulina; NOWAK, Maciej J.; MITREA, Andrei; BLASZKE, Małgorzata (Taylor and Francis, 2025)
    This chapter centres on Warsaw as the most relevant case study in Poland. From an institutional perspective, the Polish spatial planning system is notably fragile. This weakness presents significant challenges to the ...
  • Green spaces and urban planning in the countries surveyed. Summary and future research directions 
    NOWAK, Maciej J.; MITREA, Andrei; LEGUTKO-KOBUS, Paulina; DÜHR, Stefanie; BLASZKE, Małgorzata (Taylor and Francis, 2025)
    This final chapter offers a comprehensive synthesis of the perspectives presented across the various countries studied. It will delve into several key issues Firstly, it will explore the similarities and differences in ...
  • On dynamic probabilistic models in network reliability 
    LEAHU, Alexei; ANDRIEVSCHI-BAGRIN, Veronica; CIORBĂ, Dumitru; FIODOROV, Ion (Springer Nature, 2025)
    Our work addresses the issue of the reliability of serial-parallel networks versus the reliability of parallel-serial networks based on dynamic probabilistic models. Thus, calculation formulas for the lifetime cumulative ...
  • Planetary precessional transmission: Geometry and contact bearing capacity, kinematics and profile generation 
    BOSTAN, Ion; BOSTAN, Viorel; VACULENCO, Maxim; BODNARIUC, Ion; MAZURU, Sergiu; DULGHERU, Valeriu; CIOBANU, Radu; CIOBANU, Oleg; MALCOCI, Iulian; TRIFAN, Nicolae; VENGHER, Dumitru; BREGNOVA, Alina (Springer Nature, 2025)
    In this study, we propose a new gear with convex-concave multipair contact teeth contact for mechanical transmissions. The paper presents various kinematic structures of planetary precessional transmissions with multiple ...
  • Approaches to comparing spatial planning instruments across national systems 
    NOWAK, Maciej J.; MITREA, Andrei; DÜHR, Stefanie; GAGAKUMA, Desmond; PEÑA, Sergio; PIERRI-DAUNT, Ana Beatriz; KHAVARIAN-GARMSIR, Amir Reza (Taylor and Francis, 2025)
    This chapter includes a detailed explanation of the rationale behind the selection of countries and describes each case study. It presents the main lines of comparison among national spatial planning systems and highlights ...
  • Research regarding the structure of an autonomous mobile robot used to navigate a University Campus 
    STĂNESCU, Vlad; DONȚU, Octavian; GRĂMESCU, Bogdan; BUGA, Alexandru; CARTAL, Adrian; NICA, Cosmin (Springer Science and Business Media Deutschland GmbH, 2025)
    The presented work aims to select a mobile robotic structure capable of navigating a diverse terrain segment within the campus of the National University of Science and Technology Politehnica Bucharest. The route consists ...
  • Grape processing traceability and wine quality obtained in the Republic of Moldova Codru wine-growing region 
    VACARCIUC, L.; GODOROJA, M.; PROCOPENCO, V.; MOGÎLDEA, O.; VOINESCO, C.; BĂDULESCU, L. (International Society for Horticultural Science, 2025)
    The wine quality and authenticity are in close correlation with the ecological and the technological factors of growing and processing grapes. When ensuring the traceability for grape cultivation and wine production, one ...
  • The Clip Thinking Phenomenon: The typology of technological products for the bounds' overstepping and strengths' leveraging in the educational needs 
    BURLACU, Natalia (National Institute for R and D in Informatics, 2025)
    The paper represents a theoretical and conceptual scientific study by reference to the phenomenon of Clip Thinking, analyzed through the notional prism towards its limits for which it was stigmatized. By listing the existing ...

Search DSpace


Browse

My Account