IRTUM – Institutional Repository of the Technical University of Moldova

Browsing Articole din publicaţii internaţionale by Title

Browsing Articole din publicaţii internaţionale by Title

Sort by: Order: Results:

  • Research in Computer Science in The Republic of Moldova 
    ŢURCAN, Nelly; COȘULEANU, Ion; GRECU, Mihai; CUJBA, Rodica (Asociația Bibliotecarilor din România, 2019)
    This paper presents results of bibliometric and text-based analysis of Computer Science research output produced by academia from the Republic of Moldova during the 2013-2018 years. The authors have collected data for ...
  • Research in Computer Science in the Republic of Moldova: A Bibliometric Analysis 
    TURCAN, Nelly; COȘULEANU, Ion; GRECU, Mihai; CUJBA, Rodica (Romanian Library Association, 2019)
    This paper presents results of bibliometric and text-based analysis of Computer Science research output produced by academia from the Republic of Moldova during the 2013-2018 years. The authors have collected data for ...
  • Research of the temperature field and technical condition of the chimney on CHP-1 Kishinev 
    MUSTEATA, V. T.; BUTENKO, N. A.; VARENIK, A. M. (Institutul de Energetică al Academiei de Științe a Moldovei, 2012)
    In article such negative influences on a chimney of thermal power station-1, as temperature and humidity of outgoing gases which cause defects and damages of inner surface of a trunk of a chimney are analyzed. During work ...
  • Research of the types of postures of the woman figure for the purpose of developing high quality garments 
    ALCAZ, Olga; BALAN, Stela; TUTUNARU, Irina; IROVAN, Marcela; ŞEREUJEVA, Anjelica (Universitatea din Oradea, Romania, 2015)
    The high interchangeability of produced garments and the increased requirements towards the quality of production is conditioned by the growing individualization of orders, this is why it is important to perform systematically ...
  • Research on processing operations parts industry leather 
    MALCOCI, M.; CUCU, P. (University of Oradea, 2012)
    The leather manufacturing a product requires going through several stages in the manufacturing process by which materials are made. Stages of their characteristics involving any number of individual or associated technological ...
  • Research on the reinforcement of lipids with iodine 
    HARITONOV, Svetlana; STURZA, Rodica (Academia de Ştiinţe a Moldovei, 2005)
    The objectives of this work are researches for obtaining iodized oil that would satisfy the requirements of body in iodine. The sunflower seed oil is a product with the most important value, thus the production of oil ...
  • Researches concerning iron bioavailability in complex foods 
    CIOBANU, Corina; MOTRUC, Natalia (Sibiu Alma Mater University, 2011)
    Iron bioavailability in fortified products was researched in vivo conditions. It is established, that the consumption of iron fortified bread products promotes improvement of the basic haematological indices. In the presence ...
  • Researches on the functional clothes usage destined for persons with limb amputations 
    FLOREA-BURDUJA, Elena; RARU, Aliona; FARÎMA, Daniela; IROVAN, Marcela (Universitatea din Oradea, Romania, 2021)
    Recently, the issue of designing special clothing for people with disabilities attracts the attention of specialists in various fields. This topic is very current, important and requires in-depth studies. The need for ...
  • Researches on the use of spirulina in the production of flour products 
    DODON, Adelina; BANTEA-ZAGAREANU, Valentina; GUREV, Angela (Galati University Press, 2021)
    The study includes a documentary survey of the main categories of cereal products, their flours and dyes used as a raw material in the production of flour products. There are presented the technologies for the production ...
  • Resistive Transition Broadening of Metal-Oxide Superconductors in Magnetic Fields 
    SIDORENKO, A. S.; KONOPKO, L. A.; KOSHELEV, A. E.; SIMONOV, A. Yu. (WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim, 1989)
    This note reports results of measurements and calculations of a shape of superconductive transitions of Bi-Sr-Ca-Cu-O polycrystalline samples. Bi4Sr3Ca3Cu4Ox samples with 2x3x10 mm3 dimensions were prepared by solid-state ...
  • Resonance impurity radiation in CuGaS2 crystals 
    SYRBU, N. N.; NEMERENCO, L. L.; TEZLEVAN, V. E. (Elservier, 2007)
    In this work the reflectivity spectra of the CuGaS2 crystals have been investigated in the EIIc polarization and the absorption spectra were studied in the E⊥c polarization at the 10K. The parameters of the excitons and ...
  • Resonance Raman scattering and excitonic spectra in TlInS2 crystals 
    ZALAMAI, V. V.; STAMOV, I. G.; SYRBU, N. N.; URSAKI, V. V.; DOROGAN, V. (ELSEVIER, 2015)
    The excitons ground and excited states for Ea and Eb polarizations in absorption and reflection spectra of TlInS2 crystals were detected. The fundamental parameters of excitons and bands were determined at k=0. The ...
  • Resonance Raman scattering by excitonic polaritons in CuGaS2 
    SYRBU, N. N.; BLAZHE, M.; TIGINYANU, I. M.; TEZLEVAN, V. E. (Springer Nature Switzerland, 2002)
    Resonance Raman scattering by exciton polaritons in crystals of CuGaS2 under excitation with the 4880 and 4765 Å lines of an Ar+ laser at 9 K is studied. Lines of one-and two-phonon scattering of excitonic polaritons are ...
  • Resonance Raman scattering in CuGaxAl1-xS2crystals 
    SYRBU, N. N.; TIGINYANU, I. M.; URSAKI, V. V.; DOROGAN, A. V. (IOP Publishing, 2008)
    The change of polarization of the resonant Raman scattering lines is studied in CuGaxAl1−xS2 crystals with x equal to 1, 0.95 and 0.9 assuming resonance conditions with 4880 and 4765 Å Ar laser lines. Linear and circular ...
  • Resonance Raman Scattering in TlGaSe2 Crystals 
    SYRBU, N. N.; TIRON, A. V.; ZALAMAI, V. V.; BEJAN, N. P. (Hindawi, 2017)
    The resonance Raman scattering for geometries 𝑌(𝑌𝑋)𝑍 and 𝑌(𝑍𝑋)𝑍 at temperature 10 K and infrared reflection spectra in 𝐸 ‖ 𝑎 and 𝐸 ‖ 𝑏 polarizations at 300 K were investigated. The number of 𝐴𝑎 (𝐵𝑎) and ...
  • Resonant coupling of a semiconductor laser to a Fabry-Perot resonator 
    TRONCIU, V. Z.; RADZIUNAS, M.; WUNSCHE, H.-J.; WOLFRUM, M. (IEEE, 2005)
    This paper investigates resonant coupling of a semiconductor laser to a Fabry-Perot (FP) resonator. This study considers a laser emission which is transformed by a lossless FP into the feedback. The impact of this feedback ...
  • Resonant tunneling transport in ZnxBe1-xSe/ZnSe/ZnyBe1-ySe asymmetric quantum structures 
    SIRKELI, Vadim P.; YILMAZOGLU, Oktay; AL-DAFFAIE, Shihab; OPREA, Ion; ONG, Duu Sheng; KÜPPERS, Franko; HARTNAGEL, Hans L. (International Society for Optics and Photonics, 2017)
    II-VI compounds are promising materials for the fabrication of room-temperature terahertz devices due to their beneficial properties like as type-I conduction band alignment, high breakdown field strength (~331 kV/cm for ...
  • Resonant-tunnelling diodes for THz applications 
    FEIGINOV, Michael; SYDLO, Cezary; COJOCARI, Oleg; MEISSNER, Peter (Society of Photo-Optical Instrumentation Engineers, SPIE, 2012)
    We investigate experimentally resonant-tunnelling-diode (RTD) oscillators, which are based on RTDs with heavily doped collector. We demonstrate that such RTD oscillators can work at frequencies, which are far beyond the ...
  • Resonant-tunnelling-diode oscillators operating at frequencies above 1.1 THz 
    FEIGINOV, Michael; SYDLO, Cezary; COJOCARI, Oleg; MEISSNER, Peter (American Institute of Physics, 2011)
    We present resonant-tunnelling-diode (RTD) oscillators operating at the fundamental frequency of 1111 GHz. We show that our RTDs and RTD oscillators have much room for further improvement of their parameters and for further ...
  • Retransmission-based Available Bandwidth Estimation in IEEE 802.11-based Multihop Wireless Networks 
    VAN NAM, Nguyen; GUERIN-LASSOUS, Isabelle; MORARU, Victor; SARR, Cheikh (Association for Computing Machinery, New York, United States, 2011)
    Estimating the available bandwidth in IEEE 802.11-based multihop wireless networks is a very difficult task due to the medium sharing among contending nodes and collisions between hidden stations. Several methods have been ...

Search DSpace


Browse

My Account