Browsing 2019 by Issue Date

Sort by: Order: Results:

  • Changes in consumer properties of new grain crispbreads based on spelt during storage 
    MARDAR, Maryna; ZNACHEK, Rafaela; MACARI, Artur (Tehnica UTM, 2019)
    The changes that occur with the organoleptic, physicochemical, and microbiological performance of new grain crispbreads based on spelt with the inclusion of enriching supplements in the process of storage. Types of packing, ...
  • Inhibiting of accidental pathogenic microbiota in meat products with berry powders 
    COJOCARI, Daniela; STURZA, Rodica; SANDULACHI, Elisaveta; MACARI, Artur; BALAN, Greta; GHENDOV-MOŞANU, Aliona (Tehnica UTM, 2019)
    This article presents a case study of antimicrobial properties of berry powders on pathogenic microorganisms that can accidentally colonize meat and meat products. We tested the inhibiting properties of rose-hip and hawthorn ...
  • Management of cement-concrete road pavement structure 
    MISHUTIN, A. V.; ZAVOLOKA, M. V.; KINTIA, L. (Tehnica UTM, 2019)
    The aim of the research is to study the effect of operating factors on the pavement and optimize the composition of the modified additive for controlling the structure of concrete. The choice of modifiers for concrete ...
  • Wine production from local varieties of grapes in microwinery conditions 
    SCLIFOS, Aliona; COVACI, Ecaterina; STRATAN, Alexandra (Tehnica UTM, 2019)
    In the paper there has been studied the process of wine making from local grape varieties: Feteasca White, Feteasca, Regala, Feteasca Neagra, Rara Neagra, in conditions of microvinification. Wine raw materials were obtained ...
  • Negative impact of railway transport on the ambient environment 
    PLĂMĂDEALĂ, Vasile; SLOBODEANIUC, Stanislav (Tehnica UTM, 2019)
    Unfortunately, most of the technologies applied and currently used by mankind, to a lesser or greater degree, negatively influence and lead to the degradation and degeneration of the planetary ecosystem, with rail transport ...
  • MEMS manufacturing and reliability 
    BĂJENESCU, Titu-Marius I. (Tehnica UTM, 2019)
    Today flexibility means to produce reasonably priced customized products of high quality that can be quickly delivered to customers. The article analyses issues related to physic, able to generating defects, affecting the ...
  • Modern road safety elements of the pedestrians 
    PLĂMĂDEALĂ, Vasile (Tehnica UTM, 2019)
    More than 270000 pedestrians die annually on roads across the world, accounting for about 22% of the total number of people killed in road accidents. In addition, millions of pedestrians are traumatized, some of them become ...
  • Developing tailored clothing for children with special needs 
    DANILA, Victoria (Tehnica UTM, 2019)
    This article provides an analysis of the development clothing systems effectiveness that are tailored to preventive interventions for premature babies. An analysis of the conducted clinical trials has been framed in a ...
  • Ştefan-Ioan Georgescu-Gorjean – “the constructor” of the Endless Column 
    MANOLEA, Gheorghe (Tehnica UTM, 2019)
    When we talk about the “Endeless Column” or about the “Infinite Sacrifice Column” from Tg. Jiu, we think of Constantin Brâncuşi. When we talk about the “Endeless Column” or about the “Infinite Sacrifice Column”, we think ...
  • Mathematical modelling of teeth contact in precessional transmission 
    BOSTAN, Viorel; BOSTAN, Ion; VACULENCO, Maxim; ŢOPA, Mihail (Tehnica UTM, 2019)
    The article deals with the development of the 2K-H precessional toothed gear with convex-concave contact of the teeth. The teeth flanks of the satellite are described in the circular arc as well as the central wheels - ...
  • Classical and modern kinematic analysis applied for mechanism study 
    MALCOCI, Iulian; GUŢU, Marin (Tehnica UTM, 2019)
    Mechanism kinematic analysis is usually used for motion study or for simulating and analyzing the movement of mechanical assemblies and the whole mechanism. In this paper we will consider kinematical analysis regarding the ...
  • The generation rate and characteristics of municipal solid waste in slums of Lawang Kidul village at Palembang city 
    PRATIWI, Diah Octaviani; HADINATA, Febrian; FITRIANI, Heni (Technical University of Moldova, 2019)
    The problem of municipal solid waste (MSW) is closely related to slums, where houses in slums are stilt house and near the river, and making area under the house as the place of the garbage disposal place which is relatively ...
  • Factors that determine the shelf life of a butter-like spread based on walnut oil 
    RADU, Oxana; BAERLE, Alexei; TATAROV, Pavel; POPESCU, Liliana (Technical University of Moldova, 2019)
    The article describes the manufacturing stages for a new functional product that can enrich human diet with essential lipids – spread based on walnut oil. Due to the fact that its content of polyunsaturated fatty acids is ...
  • Application of pareto principle in monitoring walnuts quality at storage 
    SANDULACHI, Elisaveta; BOAGHI, Eugenia; TATAROV, Pavel; RESITCA, Vladislav (Technical University of Moldova, 2019)
    This paper presents two case studies of walnut quality assessment at room temperature storage of 20 ± 20C. The conformity of the Juglans regia L. walnuts, the Calarasi variety, (harvest 2015) and Cogalniceanu variety ...
  • Antimicrobial properties of berry powders in cream cheese 
    STURZA, Rodica; SANDULACHI, Elisaveta; COJOCARI, Daniela; BALAN, Greta; POPESCU, Liliana; GHENDOV-MOŞANU, Aliona (Technical University of Moldova, 2019)
    This study aims to evaluate the efficiency in reducing pathogens using berry powders in a cream cheese recipe, as compared to the traditional method of manufacturing. This article presents a review of the microbiological ...
  • Comparative analysis of methods of calculation in transient and wave processes in electric circuits 
    BERZAN, Vladimir (Technical University of Moldova, 2019)
    The problem of calculating the transient and wave processes in the circuits with the concentrated and distributed parameters is examined. A comparative-qualitative analysis of the analytical and numerical methods used for ...
  • Calculation the service waiting probability with self-similar network traffic 
    LOZHKOVSKYI, Anatolii (Technical University of Moldova, 2019)
    Calculation of the service quality characteristics in a single-channel system with queue for the packet network is often reduced to the determination of the Hurst exponent for self-similar traffic, after which using the ...
  • Theoretic approaches to substantiate shelf life capacity of butter and spreads 
    BOCHAROVA-LESKINA, Anna; VERBYTSKYI, Sergii (Technical University of Moldova, 2019)
    The analysis of scientific information on the theoretical aspects and practical features of long-term freezing storage of butter and spreads is carried out. Means of mathematical modeling are substantiated, allowing ...
  • Performance modeling of network defense in breadth systems by matrix rewriting SRN with fuzzy parameters 
    GUŢULEAC, Emilian; ZAPOROJAN, Sergiu; MORARU, Victor; SCLIFOS, Alexei (Technical University of Moldova, 2019)
    We have defined in this paper, a new kind of stochastic reward network (SRN) by introducing matrix attributes and fuzzy parameters of timed transitions and of rewriting rules, called MFRSRN, allowing the dynamic marking-dependent ...
  • Gheorghe Ion Duca - the reorganizer of the national school of bridges and roads of Bucharest 
    MANOLEA, Gheorghe (Technical University of Moldova, 2019)
    School had, has and will have an important role in building the elite of a nation. The National School of Bridges and Roads played an important part in educating engineers in Romania. Here big names from the Romanian ...

Search DSpace


Browse

My Account