Journal of Engineering Science: Recent submissions

  • Characteristics of refusals in low-voltage distribution systems 
    POPESCU, Victor; TÎRȘU, Mihai; NUCA, Ilie; LEU, Vasile; CAZAC, Vadim; BALAN, Tatiana (Technical University of Moldova, 2022)
    This paper focuses on the determination of the characteristics of refusals in low voltage electrical distribution systems. In order to solve this problem, the phenomena of occurrence of refusals in low-voltage electrical ...
  • Spectral and chromatographic characterisation of the yellow food dye from safflower 
    SAVCENCO, Alexandra (Technical University of Moldova, 2022)
    Recently, an increasingly trend of public concern for the food safety is observed. Use of additives in food industry growing steadily. Present study deals with separation and identification of compounds from Yellow Food ...
  • Effect of bioactive additives on biomass fermentation from agro-industrial sector 
    DUCA, Gheorghe; COVALIOVA, Olga; COVACI, Ecaterina; ROMANCIUC, Lidia; TAȘCA, Corina (Technical University of Moldova, 2022)
    Wastes from the agro-industrial sector, due to their toxic effects with regard to plants and living organisms, cannot be dumped in the soil. However, they can serve as renewable source of value-added products, following ...
  • Evaluation of gluten contamination in gluten-free products in the Republic of Moldova 
    SIMINIUC, Rodica; ȚURCANU, Dinu (Technical University of Moldova, 2022)
    Celiac disease (CD) is an autoimmune condition, triggered by gluten ingestion, which affects the small intestine, destroying the villi. It is considered that in recent years CD has undergone a real "metamorphosis" due to ...
  • Recent advances in smart kitchen automation technologies: principles, approaches, and challenges 
    UMAR, Buhari U.; OLANIYI, Olayemi M.; DAUDA, Idris A.; MALIKI, Danlami; OKORO, Cindy P. (Technical University of Moldova, 2022)
    The Internet of Things (IoT) is a growing network of physical devices that are connected to various types of sensors and can share data with the aid of internet connectivity. Safety is an important consideration when ...
  • Physicochemical characterization of Asmara brewery effluents 
    BABU, Aremanda Ramesh; ARSIEMA, Tekle; HEAVEN, Daniel; FILMON, Berhane; ABIEL, Mehari (Technical University of Moldova, 2022)
    Brewing industry is water intensive and consequently generates huge volumes of wastes. Bottle washing and brewing operations recognized as the major effluent sources of Asmara Brewery Corporation Share Company (ABCSC), ...
  • Rheological characterization of industrial waste modified bitumen 
    EZEMENIKE, Chukwuka; OYEDEPO, Olugbenga; ADERINLEWO, Olufikayo; OLADELE, Isiaka; OLUKANNI, Omoniyi (Technical University of Moldova, 2022)
    The aim of this research is to evaluate the rheological properties of industrial waste modified bitumen. The varying proportion of polypropylene ranging from 0% to 20% of the weight of bitumen at 5% interval with 60/70 ...
  • Photovoltaics solutions and energy communities in a clean energy roadmap 
    EFREMOV, Cristina (Technical University of Moldova, 2022)
    The present paper deals with solutions regarding the development of the Energy Strategy toward 2050 for a clean and sustainable future. At the national level conceptual elements are needed to draw a roadmap for the energy ...
  • Nanotechnology: reflections on health benefits and risks 
    BUZDUGAN, Artur (Technical University of Moldova, 2022)
    There is a constant increase in the demand for engineers who can transform nanotechnology from a scientific result into a commercial solution. However, new technologies often caused conflicts between those who want to ...
  • A novel classification with deep convolutional neural networks on pulmonary nodule 
    MATHEWS, Arun B.; PRASAD, Krishna K. (Technical University of Moldova, 2022)
    Medical images are an important part of a patient's health record, and they need data manipulation, processing, and handling by computers. As a result, medical data is a type of bigdata, and its analysis has become complex. ...
  • Smart City Services based on spatial-temporal logic 
    TURCAN, Ana; ABABII, Victor; SUDACEVSCHI, Viorica; MELNIC, Radu; ALEXEI, Victoria; MUNTEANU, Silvia; ABABII, Constantin (Technical University of Moldova, 2022)
    The development and research of Smart City Service Systems is a very important area for the future of mankind. The urbanization process imposes new criteria for qualitative and quantitative assessment of population well-being, ...
  • Interest based adaptive billboard content management 
    MORARU, Victor; CĂRBUNE, Viorel (Technical University of Moldova, 2022)
    The street advertising has undergone some significant changes in recent years: traditional billboards are gradually being replaced by electronic display devices (LED screens) that are able to change in real-time the broadcast ...
  • Application of privacy-preserving data publishing in tertiary institutions of Kebbi state using generalization and suppression 
    SHEHU, Anas; SALIHU, Alhassan; SANI, Abubakar (Technical University of Moldova, 2022)
    The research was conducted in the field of publishing data to preserve confidentiality. Several educational datasets have been used to address privacy and utility. The sample questionnaires served to investigate the level ...
  • Gas sensitive films based on Te-SnO2 nanocomposite on flexible substrate 
    TSIULYANU, Dumitru; MOCREAC, Olga; AFANASIEV, Andrei; MONAICO, Eduard (Technical University of Moldova, 2022)
    Flexible films based on novel Te-SnO2 nanocomposites were fabricated for detection of toxic gases at room temperature. The Te-SnO2 nanocomposites were obtained via solvohermal recrystallization of pure crystalline tellurium ...
  • New vapor deposited dielectric polymer thin films for electronic applications 
    SCHRÖDER, Stefan; MAGARIU, Nicolae; STRUNSKUS, Thomas; ABABII, Nicolai; LUPAN, Oleg; FAUPEL, Franz (Technical University of Moldova, 2022)
    Dielectric materials are of great interest in a vast amount of applications ranging from cable insulation to advanced electronic devices. The emerging trend of device miniaturization is creating an increased demand for ...
  • Objective approach in investigating implication of road vehicle tyre safety knowledge on compliance 
    AZODO, Adinife Patrick; ISMAILA, Olasunkanmi Salami; JIBATSWEN, Titus Y.; TIMOTHY, Owoeye Femi (Technical University of Moldova, 2022)
    Standard effectual directive on tyre safety management operations on its own is nothing without appropriate compliance and application. Deliberate oversight and neglect of safety precautionary measures may result in an ...
  • Driving tiredness – the end enemy of the driver 
    PLĂMĂDEALĂ, Vasile (Technical University of Moldova, 2022)
    In modern society, little or no sleep at all has become a habit, almost a good tradition. Fulfilled sleep is one of the key factors of a healthy lifestyle and longevity, along with proper nutrition, physical activity and ...
  • The influence of microorganisms on beer quality 
    SCLIFOS, Aliona; SCUTARU, Iurie (Technical University of Moldova, 2022)
    The paper investigated the influence of microorganisms on the quality of Oettinger and Timișoreana beer, in the context of improving the manufacturing methodology of the finished product. Two types of yeast were used for ...
  • Technological innovations as drivers of retail 4.0 – how RFID could improve returnable bottle logistics in the German beverage industry 
    BÜHRDEL, Stan Lukas; SIEGFRIED, Patrick (Technical University of Moldova, 2022)
    This research paper discusses how RFID technology could improve current deposit bottle logistic processes in food retailing and which obstacles impede successful implementations. Research Methodology include desk research: ...
  • Synthesis and implementation of biogas production in wastewater treatment plant 
    MOLDOVAN, Artiom (Technical University of Moldova, 2022)
    In this paper, the problem was to carry out a study on the process of mass production of biogas and to deduce the analysis of an example implemented in the wastewater treatment plant. The main problem is the correct ...

Search DSpace


Browse

My Account