Facultatea Calculatoare, Informatică şi Microelectronică: Recent submissions

  • Porous InP as Piezoelectric Matrix Materialin 1-3 Magnetoelectric Composite Sensors 
    GERNGROSS, M.-D.; LEISNER, M.; CARSTENSEN, J.; FÖLL, H. (Technical University of Moldova, 2011)
    This work shows the results of the fabrication of semi-insulating piezoelectric porous InP structures by electrochemical etching and subsequent purely chemical post–etching in an isotropic HF, HNO3, EtOH and HAc containing ...
  • Development of information systems to support Health Technology Management 
    IONESII, L.; MORGOCI, S. (Tehnica UTM, 2016)
    The first information system for the inventory of medical devices openMEDIS was developed with the support of Swiss Cooperation Office in the frame of PERINAT Project. Starting from 2009 the information system was piloted ...
  • Monte-Carlo-Simulation of Crystallographical Pore Growth in III-V-Semiconductors 
    LEISNER, Malte; CARSTENSEN, Jürgen; FÖLL, Helmut (Technical University of Moldova, 2011)
    The growth of crystallographical pores in III-V-semiconductors can be understood in the framework of a simple model, which is based on the assumption that the branching of pores is proportional to the current density at ...
  • Project for improving Medical Device Management in the Republic of Moldova 
    GORCEAG, G.; UMEMIYA, Y.; KANEKO, A.; YOSHINO, H.; TATENO, K.; STRATAN, C. (2016)
    Management of Medical Devices (MDM) is a field which stated its development quite recently in the Republic of Moldova due to the collaboration of the local Government with the foreign donors, and especially due to the ...
  • Characterization of sentiment groups on Twitter 
    Grozavu, Nistor; Rogovschi, Nicoleta (Tehnica UTM, 2014)
    Opinion Mining is the field of computational study of people’s emotional behavior expressed in text. The purpose of this article is to introduce a new framework for characterization of the groups of emotions extracted from ...
  • Patient safety and medical device maintenence 
    CIORAP, R.; ANDRITOI, D.; LUCA, C.; CORCIOVA, C. (Tehnica UTM, 2016)
    Medical technology plays an important role health care according to consisting general accepted standards. Purchase and operation thereby represent an important economic position and both are subject of everyday optimization ...
  • Nationwide Medical Device inventory. What to focus on 
    MALATARAS, P.; KAMARIANAKIS, Z.; DERMITZAKIS, A.; PALLIKARAKIS, N. (Tehnica UTM, 2016)
    During 2016, the Biomedical Technology Unit of the University of Patras established a Nationwide Medical Device inventory, within the framework of a national project. This inventory project lasted 5 months, covered 5 out ...
  • Challenges of managing health technologies in the IoT 
    MAGJAREVIC, R. (Tehnica UTM, 2016)
    Health technology management is an unavoidable part designing, managing and maintaining medical devices in clinical settings and everywhere else where health care is delivered. By moving the paradigm of health from just ...
  • An estimate of phonon parameters errors calculated by dispersion analysis method with help of genetic algorithm 
    ZAHAROV, I. S.; KNJAZEV, A. F.; KOCHURA, A. V.; KURKIN, A. Y. (Technical University of Moldova, 2005)
    The basic task of mathematical processing of reflectance spectra is the calculation of the dielectric function of the substance, which describe response of a crystal to an external electromagnetic field. One of effective ...
  • The philosophic concept of possible consequences of nanotechnologies practice 
    SKILEOV, Vladimir (Technical University of Moldova, 2005)
    Is the nanotechnology good or evil? The answer is clear. It is as good as well it is evil. Its au only to us how it will be this nanotechnology. We have already talked about the «cornucopia». This is rather good. However ...
  • Nanobiotechnologies of iron rich spirulina cultivation as a source of antianemic products 
    RUDIC, Valeriu; BULIMAGA, Valentina; ZOSIM, Lililana; CHIRIAC, Tatiana; TURTA, C.; LAZARESCU, Ana (Technical University of Moldova, 2005)
    The investigation of processes connected with iron accumulation in biomass of algae represents an interest as from theoretical point of view as well from practical. The study of some new Fe(III)coordinative compounds ...
  • Porous structure of synthetic opals 
    BARDYSHEV, I. I.; MOKRUSHIN, A. D.; PRIBYLOV, A. A.; SAMAROV, E. N.; MASALOV, V. M.; KARPOV, I. A.; EMELCHENKO, G. A. (Technical University of Moldova, 2005)
    The apparent density, porosity, specific surface and annihilation characteristics of positronium were measured for synthetic opals. It was shown that the total porosity consists of micropores and nanopores connected with ...
  • Способ низкотемпературной пайки спеченных твердых сплавов и углеродистых сталей 
    ПАРАМОНОВ, Анатолий; ПАРШУТИН, Владимир; КОВАЛЬ, Александр; ШОЛТОЯН, Николай (Tehnica UTM, 2014)
    В работе рассмотрены способы высокотемпературной и низкотемпературной пайки твёрдосплавного инструмента. Описан новый метод подготовки паяемой поверхности твердых сплавов и углеродистых сплавов. В результате обработки ...
  • Topology and circuit analysis of photovoltaic module integrated inverters 
    GOREMICHIN, Vladimir (Tehnica UTM, 2014)
    Special requirements on the system structure, components selection and converter topology of the Module Integrated Inverters (Converters) for PV applications are considered. Under discussion are the features of usage of ...
  • Фотоэлектрические свойства гетеропереходов на основе структурных модификаций дифосфида цинка 
    СТАМОВ, Иван (Tehnica UTM, 2014)
    Исследованы фотоэлектрические свойства гетеропереходов на α и β модификациях дифосфида цинка. Изучены анизотипные p(β) – n(α) и изотипные n1(β) – n2(α) структуры. Показано, что спектральные характеристики фототока ...
  • Possibility of a parametrical resonance when investigating optical properties of the semiconductors in exciton range of spectrum 
    KHADZHI, P.I.; NADKIN, L.Yu. (Tehnica UTM, 2014)
    The results of the theoretical investigation of the semiconductor susceptibilities in the frame of pump–probe approach are presented using the exciton–photon and exciton– exciton interaction. The strong pump beam excitates ...
  • Optical sensors and 2D all optical memory - new photonic devices based on plasmonic resonance 
    POPESCU, Aurelian (2014)
    In report is made the synthesis of the surface plasmon polariton propagation phenomenon. Methods such as Maxwell equations, Drude model used to describe the light confinement at the interface between two media are analyzed. ...
  • Электрохимический метод получения сульфида кадмия 
    ИШИМОВ, Виктор; ДЕМИДЕНКО, Иван (Tehnica UTM, 2014)
    Разработана технология электрохимического синтеза тонких плёнок сульфида кадмия из водных растворов электролитов на стеклянной подложке, поверхность которой покрыта SnO2. Полученные слои обладают хорошей механической ...
  • Динамика туннелирования бозе–конденсированных атомов в двухямной ловушке 
    ХАДЖИ, П.И.; ВАСИЛЬЕВA, О.Ф. (Tehnica UTM, 2014)
    Изучена динамика туннелирования бозе–конденсированных атомов в двухямной ловушке с учетом процессов линейного одноатомного и нелинейного парного туннелирования через барьер между ямами. Решения полученной системы нелинейных ...
  • Oптическая нутация в экситонной области спектра 
    ХАДЖИ, П.И.; ВАСИЛЬЕВ, В.В. (Tehnica UTM, 2014)
    В приближении среднего поля изучено явление оптической нутации в экситонной области спектра c учётом экситон-фотонного и упругого экситон-экситонного взаимодействий. Показано, что особенности протекания явления нутации ...

Search DSpace


Browse

My Account