Facultatea Energetică şi Inginerie Electrică: Recent submissions

  • 18-pulse Transformer Device for Flexible Connection of Asynchronous Power Systems 
    BOSNEAGA, Valeriu; SUSLOV, Victor (Institute of Electrical and Electronics Engineers, 2017)
    Transmission of active power between power systems with the same nominal frequencies, linked via phaserotating transformer is examined. The device is based on hexagonal scheme, and due to new proposal, provides symmetrical ...
  • Manufacturing and Clinically Testing Embedded Electrodes in Knitted Textiles for Neurorehabilitation 
    POBORONIUC, Marian-Silviu; IRIMIA, Danut; POBORONIUC, Ioana; IGNAT, Bogdan; CURTEZA, Antonela; MACOVEI, Laura; CRETU, Viorica; BUZDUGAN, Maria (Institute of Electrical and Electronics Engineers, 2017)
    Functional Electrical Stimulation (FES) aims to induce programmed exercises in paralyzed limbs of people who suffered a stroke, in order to improve their rehabilitation process. Nowadays, surface pre-gelled transcutaneous ...
  • Wavelet Transform and Neural Network Based Control Strategy for Hybrid Energy System 
    BACIU, Alina-Georgiana; LIVINT, Gheorghe (Institute of Electrical and Electronics Engineers, 2017)
    This paper presents a control strategy for a hybrid electric vehicle with two energy sources on board: battery and ultracapacitor. For this configuration it is proposed a new method for prediction of power demand time ...
  • Time Delay Evaluation in Printed Circuit Boards based on Timed Hard Petri Nets 
    SUDACEVSCHI, Viorica; ABABII, Victor; CALUGARI, Dmitri; BORDIAN, Dimitrie (Institute of Electrical and Electronics Engineers, 2017)
    This paper presents a synthesis method for delay time evaluation in the printed circuit boards based on Timed Hard Petri Nets. For the specification and modeling of the delay time evaluation system, Timed Synchronous Petri ...
  • Design of a Sliding Mode Controller to Eliminate the Limit Cycle in Chaotic Van der Pol System in Comparison with State Feedback Controllers 
    AHMAD, Shahzad; YASIN, Abdul Rehman; PLESCA, Adrian; YOUNIS, Usman (Institute of Electrical and Electronics Engineers, 2017)
    In this paper sliding mode controller is designed in comparison with the linear state space feedback controllers namely the pole placement controller and linear quadratic regulator to eliminate the chaotic limit cycle ...
  • Simultaneous Estimation of Speed and Rotor Resistance in the Sensorless Vector Control Systems with Induction Motors 
    STOICUTA, Olimpiu; PANA, Teodor; MOLNAR, Robin; DEACONU, Daniel (Institute of Electrical and Electronics Engineers, 2017)
    This paper presents a new method of simultaneous estimation of speed and rotor resistance of an induction motor, from a sensorless vector control system. The simultaneous estimation of the speed, rotor flux and of rotor ...
  • Robust control of MPPT of a PV cell 
    DARAB, Cosmin; TURCU, Antoniu; STEFANESCU, S.; BOTEZAN, A.; PICA, Constantin; PAVEL, Sorin (Institute of Electrical and Electronics Engineers, 2017)
    This work presents a robust control approach for Maximum Power Point Tracking (MPPT) of a standalone solar Photo Voltaic (PV) system, in order to boost its efficiency. For testing the algorithm, it was considered an 80W ...
  • Analysis of the Control Action of the Epitaxial Layers Growing in the Automatic System with PID Controller 
    BARANOV, Simion; FIODOROV, Ion; COJUHARI, Irina; GLINCA, Maxim (Institute of Electrical and Electronics Engineers, 2017)
    It is reported an investigation of control action (CA) of the energy source in the automatic control system of thermal process’ parameters in the technology of the epitaxial growing of the compound layers A3B5 by the ...
  • Novel Method for Control of non linear system based on Negative Acceleration 
    BENMILOUD, Tarek (Institute of Electrical and Electronics Engineers, 2017)
    In this paper, a novel method of control of non linear system is presented. The new concept describes a method to obtain a stabilized control of non linear system. This method shows that by imposing a negative value for ...
  • Automatic Temperature Control in 3D Printing of the Polymer Details 
    COJUHARI, Irina; FIODOROV, Ion; IZVOREANU, Bartolomeu; MORARU, Dumitru; BOTNARU, Sorin (Institute of Electrical and Electronics Engineers, 2017)
    In this paper it is designed the automatic system for formation the small pieces from polymer, based on the principle of thermoplastic extrusion. The system has a goal to form pieces with a maximum volume of 20535 mm3. ...
  • Camera Calibration and Tracking for Gimballed Like Eye Structure in Robots with Hardware Implementation 
    YASIN, Abdul Rehman; PLESCA, Adrian; ASHRAF, Muhamamd; AHMAD, Shahzad; NASIRULLAH, Rudania; NASEER, Huma; ADAM, Muhammad (Institute of Electrical and Electronics Engineers, 2017)
    Confront location based on camera tracking is an active research area as it offers numerous applications, particularly for security-based surveillance, robot vision and visual guidance. This paper presents a camera calibration ...
  • Hybrid Petri Nets a Framework for Hybrid Systems Modeling 
    DRIGHICIU, Mircea Adrian (Institute of Electrical and Electronics Engineers, 2017)
    The purpose of this paper is to present the achievement of the Hybrid Petri Nets techniques used for modeling and behavioral analysis of a class of hybrid systems. In our sense, a dynamic hybrid system contains at least ...
  • Self-Assessment as a Key Criterion for Increase of Quality of Higher Education in Modern Conditions 
    BERZINA, Kristina; ZICMANE, Inga; KUCKOVSKIS, Jevgenijs (Institute of Electrical and Electronics Engineers, 2017)
    The process of globalization poses new challenges for the government in the field of education system regulation. The growing importance of the need for a qualitative assessment of the state of the educational process ...
  • Latvian Electrical Power System Stability’s Analysis Taking into Account New Development Strategy Until 2025 
    ZICMANE, Inga; BERZINA, Kristina; SOBOLEVSKIS, Aleksejs; KOVALENKO, Sergejs (Institute of Electrical and Electronics Engineers, 2017)
    Energy is one of the sectors directly affecting the economic growth and forming a significant part of overall expenses in several industry branches, especially in manufacturing. The development of the energy sector requires ...
  • Elevator Drives. Present Trends and Perspectives 
    BLANUŠA, Branko; KNEŽEVIĆ, Bojan; ERCEG, Bojan; LEKIĆ, Đorđe; MRŠIĆ, Predrag (Institute of Electrical and Electronics Engineers, 2017)
    In this paper some of the problems related to electrical drives in modern elevators are presented. These are the modeling of jerk and the definition of the motion trajectory, power savings, efficiency optimization and ...
  • Metoda componentelor simetrice în calculul circuitelor polifazate 
    CHIORSAC, Mihail; TERTEA, Ghenadie; SIDELNICOV, Veaceslav; TURCUMAN, Lilia (Tehnica UTM, 2011)
    Lucrarea este consacrată utilizării metodelor componentelor simetrice la determinarea curenţilor şi tensiunilor în diferite regimuri nesimetrice de funcţionare a sistemelor polifazate la redresarea curentului alternativ ...
  • Analiza consumului de resurse energetice a Republicii Moldova în perioada 1990 – 2008 
    PASECINIC, Mihail (Tehnica UTM, 2011)
    În acestă lucrare am analizat consumul de resurese energetice a Republicii Moldova în perioada anilor 1990 – 2008. Unde a fost analizată evolutia fiecarei resursă energetică în parte. Am prezentat valori statistice exprimate ...
  • Zgomotul electronic – obstacol în calea tehnologiilor avansate 
    BRAGUŢA, Mihail (Tehnica UTM, 2011)
    Această lucrare este dedicată metodei de calcul a zgomotului propriu al dispozitivelor de selecţie a semnalelor prin frecvenţa, în baza filtrelor active RC.
  • Dependenţa puterii generate şi pierderilor de putere de impedanţa sarcinei liniei de tensiune înaltă 
    BARONCEA, Radu (Tehnica UTM, 2011)
    În lucrare este efectuat un studiu de caz privind dependenţa puterii generate, transmise, pierderilor de putere şi a randamentului de impendanţa sarcinei liniei de 400 kV cu lungimea de 850 km.
  • Электротравматизм в Молдове 
    ВИТЮК, Александр (Tehnica UTM, 2011)
    Современный уровень технического прогресса невозможен без широкого внедрения электрооборудования, что в свою очередь вызывает необходимость постоянного совершенствования требований к его безопасному обслуживанию и средств ...

Search DSpace


Browse

My Account