The goal of the work is to increase the yield of methane in biogas plants due to the joint methane fermentation of cattle manure with apple pomace. To achieve this goal, the following tasks were solved: the yield of biogas ...
The research is aimed at substantiating the technical use of natural gas combustion in an environment with a high oxygen content and, in the long-run objective - in pure oxygen in a steam turbine power unit. To achieve ...
BASMANOV, V.G.; KHOLMANSKIKH, V.M.; SUNTSOV, K.A.(Institutul de Energetica, 2024)
The purpose of this work is to substantiate the use of probabilistic components of the availability factor of the power supply system (PSS) of the enterprise consisting of a electric power system and autonomous loaded ...
SHEVCHENKO, V.V.; MINKO, A.N.; STOYCHEV, V.T.(Institutul de Energetica, 2024)
The aim of the work is to obtain practical results for the electrical machines multiparametric design application, to conduct a comparative analysis of the parametric and multiparametric design results of a turbogenerator ...
The use of machine learning methods to control heat supply systems is a pressing issue worldwide. The aim of the work is to develop methods for intellectualizing the operating modes of individual heat supply units (IHU) ...
KUTNYI, B.A.; KROT, O.P.; CHERNETSKA, I.V.(Institutul de Energetica, 2024)
Іndustrial synthesis of gas hydrates is a promising area for storage, transportation and utilisation of natural gas. The aim of this work is to evaluate the factors that affect the efficiency of gas hydrate synthesis, in ...
The aim of the work is to develop the uniaxial ferrofluid sensor suitable for use either as an accelerometer for low-frequency vibrations or as a ballistic device or seismic sensor for shock loads. The goal is achieved by ...
SUVOROV, D.M.; TATARINOVA, N.V.(Institutul de Energetica, 2024)
The aim of the study is to develop a methodological approach to assessing the incremental efficiency of electricity generation at CHPPs (specific heat consumption for changing electric power of turbine) in operating modes, ...
Increasing the efficiency of using fossil fuels at thermal power plants is an urgent task. This problem arises most acutely during the operation of pulverized coal power boilers using flare fuel combustion technologies. ...
The work focuses on wireless power transfer for electric vehicle charging stations. The aim of the study is to analyse the processes in the system of wireless magnetic resonance transmission of electrical energy using ...
The object of this study is the process of generating an appropriate response by an intelligent agent when detecting and tracking an underwater electrical cable using a decision support system. The goal of the work is to ...
CHERNOUSENKO, O.Yu.; MARYSIUK, B.A.(Institutul de Energetica, 2024)
The article aims to contribute to the ongoing study of damage to steam turbine rotors resulting from asynchronous connection of electric generators to the unified power system. At the present time, the assessment of the ...
SIT, M.L.; JURAVLEOV, A.A.; FRID, S.E.; TIMCHENKO, D.V.; DENYSOVA, A.E.; UZUN, M.(Institutul de Energetica, 2024)
The control system of a bivalent heat pump (BHP), using as low potential heat (LPH) sources both the heat of the return water of the network and the heat of the outside air, is considered. The aim of the work is to determine ...
ZABLODSKIY, M.; KLENDIY, P.; DUDAR, O.; SHVOROV, S.(Institutul de Energetica, 2024)
The purpose of the work is to build the rational system for regulating technological parameters of the single-screw extruder using the frequency-regulated electric drive with limited use of sensors. This goal is achieved ...
KHALYASMAA, A.I.; MATRENIN, P.V.; EROSHENKO, S.A.(Institutul de Energetica, 2024)
The functioning of deeply integrated technological systems in the power industry depends on the quality of power supply systems. Reliable power supply requires minimizing emergencies at power plants and substations. Reducing ...
HALCHENKO, V. Ya.; TREMBOVETSKA, R.V.; TYCHKOV, V.V.(Institutul de Energetica, 2024)
The article’s aim is to create a method of reducing the influence on the surface eddy current probes output signal of a number of interfering parameters without their elimination, to ensure its stability, which is achieved ...
MYTROFANOV, O.; PROSKURIN, A.; KONG, W.(Institutul de Energetica, 2024)
The article examines the features of the combustion process of hydrogen-containing gas (syngas) in the working cylinder of a spark-ignition internal combustion engine. The main objective of the study is to evaluate the ...
AMELINA, M.; AMELIN, S.; YAKIMENKO, I.(Institutul de Energetică, 2024)
The purpose of the work is to develop continuous mathematical models of power factor correctors for switch-mode power supplies. The models are designed to solve optimization problems aimed at increasing the energy efficiency ...
The purpose of the work is to develop a synthesis method for the spatial and angular arrangement of magnetic field sensors in order to ensure maximum efficiency of a robust system for active shielding of the magnetic field ...
This paper presents the results of a study on optimising the feed stream pressure of the Mixed Fluid Cascade natural gas liquefaction cycle. The objective is to optimise the pressure of the feed stream to distribute heat ...