Browsing by Author "ADELUNG, R."

Sort by: Order: Results:

  • SIEBERT, L.; TERASA, M. I.; ABABII, N.; LUPAN, O.; ADELUNG, R. (Tehnica UTM, 2019)
    Sensors start to play an ever increasing role in human life and new technologies for their cost-effective mass production are required. In this work, the one-step 3D-printing of nanoflakes - nanowire covered Fe2O3/Fe - ...
  • CRETU, V.; ABABII, N.; POSTICA, V.; MAGARIU, N.; HOPPE, M.; VERJBITKI, V.; SONTEA, V.; ADELUNG, R.; LUPAN, O. (Tehnica UTM, 2019)
    Copper oxide nanostructured films were synthesized via a chemical synthesis (SCS) method and annealed in low vacuum. The morphological properties were investigated using scanning electron microscopy (SEM). The elaborated ...
  • SCHÜTT, A.; LUPAN, O.; ADELUNG, R. (Tehnica UTM, 2019)
    The impact of (bulk) material and rear surface (contact) quality to the efficiency is found to be quite hard to measure on a processed solar cell. We will show with this paper that CELLO (solar cell local characterization) ...
  • HÖLKEN, I.; SCHRÖDER, S.; ADELUNG, R. (Tehnica UTM, 2015)
    Hollow inorganic microstructures have gained much interest in nowadays research fields as they offer unique properties (high specific area, thermal conductivity or density) when compared to their bulk equivalents 1. On the ...
  • GHIMPU, L.; URSAKI, V. V.; PANTAZI, A.; MESTERCA, R.; BRÂNCOVEANU, O.; SHREE, Sindu; ADELUNG, R.; TIGINYANU, I. M.; ENACHESCU, M. (ELSEVIER, 2018)
    We report the fabrication and characterization of SnO2/CdTe and SnO2/GaAs core/shell microstructures. CdTe or GaAs shell layers were deposited by radio-frequency (RF) magnetron sputtering on core SnO2 microwires synthesized ...
  • MONAICO, Ed.; POSTOLACHE, V.; BORODIN, E.; URSAKI, V. V.; LUPAN, O.; ADELUNG, R.; NIELSCH, K.; TIGINYANU, I. M. (IOP Publishing Ltd, 2015)
    In this paper, we show that long-duration-photoconductivity decay (LDPCD) and persistent photoconductivity (PPC) in porous InP structures fabricated by anodic etching of bulk substrates can be controlled through the ...
  • POSTICA, V.; LUPAN, O.; SONTEA, V.; TROFIM, V.; SCHÜTT, F.; SMAZNA, D.; MISHRA, Y. K.; ADELUNG, R. (IEEE, 2017)
    In this work, the UV detection properties of ZnO tetrapod (ZnO-T) networks functionalized with carbon nanotubes (CNTs), as well as for individual ZnO-T-CNT are reported. The ZnO-T networks were fabricated via a flame ...
  • POSTICA, V.; LUPAN, O.; ABABII, N.; HOPPE, M.; ADELUNG, R.; CHOW, L.; SONTEA, V.; ASCHEHOUG, P.; VIANA, B.; PAUPORTÉ, Th. (SPIE, 2018)
    In this work, zinc oxide (ZnO) nanostructured films were grown using a simple synthesis from chemical solutions (SCS) approach from aqueous baths at relatively low temperatures (< 95 °C). The samples were doped with Pd ...
  • CRETU, V.; POSTICA, V.; ABABII, N.; MAGARIU, N.; SONTEA, V.; SCHÜTT, F.; ADELUNG, R.; LUPAN, O. (Tehnica UTM, 2015)
    In this work, the effect of different dopants on selectivity performance of gas sensor structures based on CuO nano-structured films that were synthesized from aqueous chemical solutions SCS is reported.
  • POSTICA, V.; SCHÜTT, F.; LUPAN, C.; KRÜGER, H.; ADELUNG, R.; LUPAN, O. (Universitatea Tehnică a Moldovei, 2021)
    In this work, the individual hexagonal boron nitride (h-BN) microtubular structures with different diameter (ranging from ≈ 0.2 to ≈ 2.5 μm) and a wall thickness below 25 nm were investigated for the first time by integration ...
  • CRETU, V.; POSTICA, V.; ABABII, N.; SCHÜTT, F.; HOPPE, M.; SMAZNA, D.; TROFIM, V.; SONTEA, V.; ADELUNG, R.; LUPAN, O. (Sumy State University, 2015)
    The synthesis via chemical solutions (aqueous) (SCS) wet route is a low-temperature and cost-effective growth technique of high crystalline quality oxide semiconductors films. Here we report on morphology, chemical ...
  • ALDRIGO, M.; DRAGOMAN, M.; BRANISTE, T.; IORDANESCU, S.; RAEVSCHI, S.; SHREE, S.; ADELUNG, R.; TIGINYANU, I. (Tehnica UTM, 2019)
    In this paper, we present the electromagnetic interference shielding properties of an ultra-porous and ultra-light GaN-based nanomaterial, which we will refer to with aeroGaN. The importance of the so-called X-band (8.2-12.4 ...
  • HÖLKEN, I.; HOPPE, M.; ADELUNG, R.; BAUM, M. (Tehnica UTM, 2015)
    The worldwide increasing number of off-shore wind turbines brings along the need for innovative polymer coatings which on the one hand can withstand the extreme forces acting on the rotor blades and on the other hand can ...
  • ABABII, N.; POSTICA, V.; HOPPE, M.; ADELUNG, R.; LUPAN, O.; RAILEAN, S.; PAUPORTÉ, T.; VIANA, B. (Society of Photo-Optical Instrumentation Engineers, SPIE, 2017)
    The most important parameters of gas sensors are sensitivity and especially high selectivity to specific chemical species. To improve these parameters we developed sensor structures based on layered semiconducting oxides, ...
  • POSTICA, V.; HÖLKEN, I.; BUMKE, L.; BAUM, M.; ABABII, N.; LUPAN, O.; ADELUNG, R. (Technical University of Moldova, 2016)
    Traditional gas sensors and biosensors based on metal oxide micro- and nanostructures, which are widely investigated in the past decades, have very high electrical resistivity (in range of MΩ – TΩ). Such high resistivity ...
  • LUPAN, O.; POSTICA, V.; GRÖTTRUP, J.; MISHRA, A. K.; DE LEEUW, N. H.; CARREIRA, J. F. C.; RODRIGUES, J.; BEN SEDRINE, N.; CORREIA, M. R.; MONTEIRO, T.; CRETU, V.; TIGINYANU, I.; SMAZNA, D.; MISHRA, Y. K.; ADELUNG, R. (American Chemical Society, 2017)
    In this work, the exceptionally improved sensing capability of highly porous three-dimensional (3-D) hybrid ceramic networks toward reducing gases is demonstrated for the first time. The 3-D hybrid ceramic networks are ...
  • VAHL, A.; DITTMANN, J.; JETTER, J.; VEZIROGLU, S.; SHREE, S.; ABABII, N.; LUPAN, O.; AKTAS, O. C.; STRUNSKUS, T.; QUANDT, E.; ADELUNG, R.; SHARMA, S. K.; FAUPEL, F. (IOP Publishing Ltd, 2019)
    Morphology is a critical parameter for various thin film applications, influencing properties like wetting, catalytic performance and sensing efficiency. In this work, we report on the impact of oxygen partial flow on the ...
  • TIGINYANU, I. M.; VOLCIUC, O.; STEVENS-KALCEFF, M. A.; POPA, V.; GUTOWSKI, J.; WILLE, S.; ADELUNG, R.; FOLL, H. (Academia de Ştiinţe a Moldovei, 2013)
    We show that the descrete nature of ion beam processing used as a component in the approach of surface charge lithography leads to spatial modulation of the edges of the GaN nanostructures such as nanobelts and nanoperforated ...
  • POSTICA, V.; LUPAN, O.; GRÖTTRUP, J.; ADELUNG, R. (Springer Nature Switzerland, 2018)
    Individual micro- and nanostructures of metal oxides are known to be highly sensitive to surface phenomena due to their enhanced surface-to-volume ratio. In this work, an individual Bi2O3-functionalized ZnO microwire ...
  • LUPAN, O.; POSTICA, V.; ABABII, N.; HOPPE, M.; CRETU, V.; TIGINYANU, I.; SONTEA, V.; PAUPORTÉ, Th.; VIANA, B.; ADELUNG, R. (ELSEVIER, 2016)
    In this study, the impact of different morphologies of p-type copper oxide nanostructures on hydrogen gas response is investigated. Sensor structures based on CuO nanowire (NW) networks demonstrated much higher gas response ...

Search DSpace

Browse

My Account